Manuals > Device Connection Guide > Yokogawa Electric > Connection Procedure (RS-232C)

About the connection example

Please see below for an example of connection settings for this driver.

Applicable models etc.

explanation

This is an example of connection settings via RS-232C with the FA-M3V series.

Device List

The compatible devices are as follows (see here for how to view the device list).

device	keyword	Start address	explanation	unit	reading	Writing
Input Relay	X	00201	Decimal number 1 digit (unit number 0 to 7) + Decimal number 2 digits (01 to 16) + Decimal number, 2 digits (terminals 01 to 64)	bit	○	×
Output Relay	Y	00201	Decimal number 1 digit (unit number 0 to 7) + Decimal number 2 digits (01 to 16) + Decimal number, 2 digits (terminals 01 to 64)	bit	○	○
Internal Relay	I	00001	Decimal	bit	○	○
Shared Relay	E	00001	Decimal	bit	○	○
Link Relay	L	00001	Decimal	bit	○	○
Special Relay	M	00001	Decimal	bit	○	○
Timer Contact	TU	0001	Decimal	bit	○	○
Counter Contact	CU	0001	Decimal	bit	○	○
Current timer value (DOWN type)	TP	0001	Decimal	word	○	●
Timer current value (UP type)	TI	0001	Decimal	word	○	●
Timer setting value	TS	0001	Decimal	word	○	×
Counter current value (DOWN type)	CP	0001	Decimal	word	○	●
Counter current value (UP type)	CI	0001	Decimal	word	○	●
Counter setting value	CS	0001	Decimal	word	○	×
Data Register	D	00001	Decimal	word	○	●
File Register	B	00001	Decimal	word	○	●
Shared Registers	R	00001	Decimal	word	○	●
Index Register	V	00001	Decimal	word	○	●
Special Registers	Z	00001	Decimal	word	○	●
Link Register	W	00001	Decimal	word	○	●

FA-M3 LC11-1N equivalent