Manuals > Device Connection Guide > Panasonic > Connection Procedure (RS-232C)

About the connection example

Please see below for an example of connection settings for this driver.

Applicable models etc.	explanation
Connection example [FP series]	This is an example of connection settings with the FP series via RS-232C.
Connection example [FP7 series]	This is an example of connection settings with the FP7 series via RS-232C.
Connection example [KW2G]	This is an example of how to connect to KW2G using USB.

Device List

The compatible devices are as follows (see here for how to view the device list).

device	keyword	Start address	explanation	unit	reading	Writing
Input Relay	X	0000	3 decimal digits + 1 hexadecimal digit	bit	○	×
Output Relay	Y	0000	3 decimal digits + 1 hexadecimal digit	bit	○	○
Internal Relay	R	0000	3 decimal digits + 1 hexadecimal digit	bit	○	○
Link Relay	L	0000	3 decimal digits + 1 hexadecimal digit	bit	○	○
Special Relay	R	9000	3 decimal digits + 1 hexadecimal digit	bit	○	○
Timer Contact	T	0000	Decimal	bit	○	×
Counter Contact	C	0000	Decimal	bit	○	×
Timer/Counter (Elapsed Value)	EV	0000	Decimal	word	○	●
Timer/Counter (Setting Value)	SV	0000	Decimal	word	○	●
Data Register	DT	00000	Decimal	word	○	●
Link Register	LD	00000	Decimal	word	○	●
File Register	FL	00000	Decimal	word	○	●

When connecting to the FP7 series, the following restrictions apply.

- Timer/counter area communication not possible

- You cannot specify a word area that exceeds 99999.

- You cannot specify a bit area that exceeds 9999.

When connecting to the KW2G, the only device that can be used is the data register.

MEWNET-FP series CPU equivalent port