Operation on one PC

<< Click to Display Table of Contents >>

Manual > Monitoring system construction guide > System installation and operation > System configuration and operation (runtime execution) > System configuration and operation type >

Operation on one PC

Example of operation configuration

This configuration is a standalone configuration with only one PC.

 

If you do not use FA-Client, only run FA-Server.

tra_0662
 

If you use FA-Client, you can also run FA-Server and FA-Client simultaneously on one PC.

 

tra_0663

 

 

Connection settings between FA-Server and FA-Client

If you are running FA-Server and FA-Client simultaneously on one PC, set the following in the FA-Client client configuration file (FAClient.txt).

 

Property Name

Contents

PSNode

Specify the IP address of the FA-Server to connect to. Specify the address set in Panel-Interface.

Furthermore, if the FA-Server you are connecting to is the same PC, you can leave this field blank.

 

example)

PSNode=192.168.1.10

 

PSPanelPort

You can specify the port number when connecting with FA-Server and Panel-Interface. If omitted, port 6001 will be used. In the case of a redundant configuration, specify the port number of the primary FA-Server.

 

example)

PSPanelport=6001

 

 

 

hint

For information about the FA-Client client configuration file, please refer to "Client Settings".