Basic

Forwarding server name

_FileServerName

default:Not specified

There are two ways to share pen settings on the server side: using the public folder of Panel-Interface or sharing a file via the File server action. Note that if you do not want to share pen settings on the server side (if the "_PenFilePosition" property is "CLIENT"), this setting is not necessary.

■ When using the public folder of Panel-Interface

If you want to share the setting information on the server side using the public folder of Panel-Interface, leave this property blank and set the "_PenFilePosition" property to "SERVER". With this setting, the necessary subfolders will be automatically created in the folder defined as the public folder name "server_data_cnf" of Panel-Interface, and the setting information will be saved there. If the public folder has not been created, please refer to the following to create a public folder called "server_data_cnf" from the settings screen of Panel Server. For information on how to register a public folder, please refer to "Panel-Interface Basics".

(Public folder settings for Panel-Interface: server_data_cnf)

•Enable public folder: Check

•Public Folder Name: server_data_cnf

•Public folder: server_data\config

•Allow file reading only: Uncheck

■ When using the File server action

On the other hand, if you want to share the setting information on the server side using the File server action, specify the name of the action to connect to in this property and set the "_PenFilePosition" property to "SERVER". This will save the setting information in the pen file with the file name specified in "_PenFile" in the target folder of the File server action.

Log Type

_LogType

default:RAW;DAY;MONTH;YEAR

Defines the log type of the refinement condition used in selecting the data source for setting pen information. However, this condition can only be specified when selecting the data source from a summary action. When adding an aggregation type in a summary action, you can add this information to increase the refinement conditions. Each piece of data is separated by a semicolon (;).

Keep your settings

_IsSaveDisp

default:True

Specifies whether the screen state is preserved.

Show Settings button

_IsConfig

default:True

Specifies whether to show or hide the settings button.

Pen File

Storage location

_PenFilePosition

default:SERVER

Sets how to store the pen information file (CLIENT/SERVER).

Pen File

Local Path

_PenLocalPath

default:config

Set the folder that holds the pen information file. If the "_PenFilePosition" property is "CLIENT", specify a relative path (relative to the client folder). If the "_PenFilePosition" property is "SERVER", this setting is not used.

Pen File

File name

_PenFile

default:trend_peninfo.txt

Sets the file name of the pen information file.

Output File

Output Folder

_OutFilePath

default:output

Sets the default folder for output files (CSV output).

Output File

File name

_OutFileName

default:trend

This is the string that will be added to the beginning of the default file name of the output file (CSV output). The default file name will be "_date and time.csv" following this string.

Output File

Output Type

_OutFileType

default:TITLE

Specifies what to output in the header line of the output file (CSV output).

Graph Settings

Background Color

_GraphBackColor

default:@DarkBackColor

Sets the background color of the graph. If you select "Select no color" (leave the property blank), the background will be transparent. If you want to set a background image with "_GraphBackFile", set this property to "Select no color".

Axis Line Color

_GraphGridLineColor

default:@ChartLineColor

Specifies the frame color of the graph.

Text Color

_GraphTextColor

default:@ChartTextColor

Specifies the text color for the graph part.

Display Line Width

_GraphLineSize

default:-1

Specifies the size of the graph pen's drawing lines. If you specify -1, the pen width specified in the pen settings size will be valid.

Background Image

_GraphBackFile

default:Not specified

Sets the background image for the graph. Specify with an absolute path or relative path. To enable the background image, set "_GraphBackColor" to "Select no color."

Background Transparency

_GraphBackFileAlpha

default:1

Specifies the transparency of the image file specified in "_GraphBackFile." Specify the transparency ratio between "0-1," where 0 is transparent, 0.5 is semi-transparent, and 1 is non-transparent.

Pen Grid Settings

Header

Background Color

_PenGridHeaderBackColor

default:@GridHeaderColor

Specifies the background color of the grid header of the pen information list.

Header

Text Color

_PenGridHeaderTextColor

default:@TextColor

Specifies the text color of the grid header of the pen information list.

grid

Background Color

_PenGridBackColor

default:@DarkBackColor

Specifies the background color of the grid part of the pen information list.

grid

Text Color

_PenGridTextColor

default:#FFFFFF

Specifies the text color of the grid part of the pen information list.

grid

Line Color

_PenGridLineColor

default:@BorderColor

Specifies the border color of the grid part of the pen information list.

grid

Selection Color

_PenGridSelectColor

default:@DarkSelectColor

Specifies the selection color for the grid part of the pen information list.

Number of lines displayed

_PenGridRows

default:8

Specifies the number of lines to display in the grid section of the pen information list.

Show the pen grid

_IsGridDisplay

default:True

Specifies whether to display the grid section of the pen information list.

Pen Grid Column Width

_PenGridColWidth

default:50,50,0,60,60,60,60,60,60,60,60,60

Specify the column width of the pen list in pixels from the left, separated by commas. If you specify an empty string, it will be displayed with the default width above.

Period setting

Enabled/Disabled

_ChangeSpanMode

default:False

When displaying a historical trend, if the display period in the graph is changed, the data source can be automatically switched to another one depending on the period. Set this property to True to enable automatic switching.

The automatic switching process is performed according to the settings of the related properties "_ChangeSpan" and "_ChangeSpanDataName".

For example, by setting the display period to one day or more, you can display thinned data (daily report aggregate data) when displaying long periods, or switch to referencing historical data logged at a different interval, by setting the data source to refer to DAY from RAW. By enabling this setting, you can reduce the screen display load when displaying long-term data.

Note that this property setting is disabled when real-time trends are displayed.

Span Settings

_ChangeSpan

default:86400;2592000;31536000

When "_ChangeSpanMode" is True, set the span period for switching the data source. The setting is in seconds, and periods are separated by ";" (half-width semicolon). The default behavior is to automatically switch the connection to the data source set in "_ChangeSpanDataName" when the span is 1 day or more, 30 days or more, or 365 days or more.

Data Settings

_ChangeSpanDataName

default:.RAW::/.DAY::/.MONTH::/.YEAR::;LOG.SEC./LOG.DAY./LOG.MONTH./LOG.YEAR.

Set the data source string that will be automatically switched when "_ChangeSpanMode" is True. When setting this property, specify the connection destination information that will be switched by the period separator specified in "_ChangeSpan" by enumerating the source and destination strings.

To specify, list the part of the data source string you want to use as the source string (for example, ".RAW::"), followed by the replacement string you want to replace when the period division number specified in "_ChangeSpan" is +1 (for example, ".DAY::"), separated by a "/" (half-width slash). Also, if there are multiple data sources for the connected server action (for example, when summary actions and logger actions are mixed), write each combination separated by a ";" (half-width semicolon).

Setting example)

To set this property,

".RAW::/.DAY::/.MONTH::/.YEAR::;LOG.SEC./LOG.DAY./LOG.MONTH./LOG.YEAR."

It is set as follows:

"_ChangeSpanMode" is "T" and

If "_ChangeSpan" is set to "86400;2592000;31536000", if you change the display period (span) while the graph is displayed, the following behavior will occur.

■If the pen data source is "A01.RAW::T000"

■If the pen data source is "LOG.SEC.T001"

Display Data Settings

Maximum number of data

_HDSDataMax

This is the upper limit of the number of data items that can be acquired at one time for graph display.

When there is a large amount of target data for the specified span, the maximum number of data items is limited to prevent the screen display from temporarily ceasing.

For more information about this property, see also the "RealtimeUpdateMode", "HistoricalUpdateMode" and "UpdateCounterMax" properties in Histrical data graph control.

How to calculate the maximum and minimum power factor values

_PowerfactorMaxMinType

default:TYPE1

Select the method for calculating the maximum and minimum power factor values when displaying power factor data.

Display settings

Initial Value

X-Axis (seconds)

_DefaultTimeSpan

default:0

Specifies the default display period [seconds] that will be set when a pen group is added.
If set to 0, the display period will not change when you switch groups, and the previously displayed display period will remain the same.

Initial Value

Initial Size

_DefaultSize

default:1

The initial pen size when a pen is added.

Initial Value

Number of decimal places

_DefaultDecimal

default:0

The initial decimal point value when adding a pen.

Graphical display

Cursor Color

_GraphProbeColor

default:#FF0000

Specifies the color of the graph cursor (probe).

Graphical display

OFF Bar color

_GraphOffBarColor

default:#FFFFFF

Specifies the OFF color for pens that have "Color Bar" set as the plot type in the pen settings.

Graphical display

Real-time updates when displayed on screen

_IsRealTime

default:True

If True, real-time updates will begin when the screen is displayed.

Graphical display

Update Cycle

_UpdateInterval

default:1000ms

Specifies the update cycle for the screen display when updating in real time.

Graphical display

Show Milliseconds

_IsMilliSecond

default:False

Show milliseconds on the graph.

Multilingual Settings

Date and Time Format Name

_DeteTimeFormat

default:@DATETIME

Date display format. For details on date and time formats, see "Date and Time Formats" in the Appendix.

CSV Format name

_DateTimeFormatCsv

default:@DATETIME

The format in which dates are displayed when outputting to CSV.

Number Format Name

_NumberFormat

default:@NUMBER.S

Number display format. For information on number formats, see "Number Format" in the Appendix.

others

Related Information Parameters

_SystemRelatedConf

This is a parameter for use in related information. Do not change this parameter.