overview
This section explains the settings on the Panel Server side required for the camera registration screen library.
In addition, for standard projects generated using the standard framework, the necessary settings are usually already configured, so there is no need to configure them manually.
The steps introduced here should be performed in the following cases:
•For your own projects that do not use standard frameworks.
•If you are using the Standard Framework but required settings such as Shared Folders have been removed.
|
The steps introduced on this page assume that the root folder of the Panel Server application settings/system settings is set as follows. Also, when importing actions from a sample, the settings for each action are set with a relative path. This setting allows the project to continue working even if the folder name or folder hierarchy of the project folder changes. If you do not specify a root folder, such as when importing a screen library into your own project, make adjustments according to the project environment, such as making sure the relative path reference locations match, or defining the reference destination of each file with an absolute path. For details, see "System Settings" in the Panel Server application settings.
(system settings root folder)
|
Server settings for camera registration
Below are the configuration steps on the Panel Server side required for the camera registration screen library.
■ Work procedure
1.Open Panel Server
With the project you are currently working on open, right-click "server.txt" in the Panel Editor tree to display the menu, and select "Open Server" from the menu.
This will start Panel Server with the target server configuration file open.
2.Set up the public folder for Panel-Interface
Next, go to the Panel Server's Panel-Interface settings and set up the public folder required for this screen library.If the necessary public folders are already registered, there is no need to configure this.
In the left tree of Panel Server, right-click on Interface "Panel" and display its properties.
Select the "Public Folders" tab in the Properties dialog and click the "Add" button.
On the public folder settings screen, enter the following information and click the OK button.
•Enable public folder: Check
•Public Folder Name: server_data_cnf
•Public folder: server_data\config
•Allow file reading only: Uncheck
Verify that the contents you added are reflected in the public folder list, and then click the OK button in the Properties dialog to save the settings.
3.Set browsing information from Panel Server application settings
Next, go to the Application settings of Panel Server and configure the settings required for this screen library.
In the left tree of Panel Server, right-click "Application" and display its properties.
Select the "Viewing Information" tab in the Properties dialog, check "View direct tag information" and click the OK button. Note that if other setting items are already checked, do not uncheck them as they may be used in other function settings.
4.Register the "Sys" unit to Panel Server
Next, create a memory device "Sys" in the Driver of Panel Server.If this unit is already registered, no further configuration is required.
In the left tree of Panel Server, right-click on Tag "Driver" and select Add Unit.
From the driver list, add "Memory", "Virtual Communications", and "Memory Device", and name the unit "Sys".
Next, create a folder called "Common" in the Sys unit. To create a folder, right-click Sys to display the menu and select "Add Folder".
Once the new folder has been added, change the name of the folder to "Common".
The above is OK as long as the units and folders have been created.If the above units and folders already exist and there are already tags registered in the Common folder, please do not edit those tags.
This completes all the necessary settings.