Property Name

Setting contents

explanation

How to connect
(PSLoginStartup)

NONE

This sets the login behavior when Panel Browser starts up.In the standard project, logic for logging in and out of the system is already built in, so there is no need to change this property.

Do not start the system until you have logged in

(PSLoginMust)

False

This setting determines whether or not login is required when starting Panel Browser.In the standard project, logic for logging in and out of the system is already built in, so there is no need to change this property.

Server duplication settings

(PSNodeRedundancy)

Set True only for duplication

If you want to operate the server in a duplicated configuration, set this to True. For details about server duplication, see "Operation with server duplication" in System Configuration and Operation (Runtime Execution).

Connect to

(PSNode)

Server IP address

Specify the IP address of the destination server. If you run Panel Server and Panel Browser on different PCs, you must specify the IP address or node name of the server. If you run them on the same PC, you can leave this blank.

Please note that there are some points to keep in mind when setting multiple IP addresses on one PC, such as when using multiple network cards. For details, please refer to "Points to note when running Panel Server and Panel Browser on one PC" in the Panel-Interface settings.

Connection 2

(PSNode2)

Server IP address (redundant sub-side)

Specify the IP address of the secondary server of the duplication. Specify this only if the server is in a duplication configuration.

port

(PSPort)

Destination server port number

Specify the port number of the destination server. The default port number is 6001. This must match the port number set in the basic settings of Panel-Interface.

Port 2

(PSPort2)

Port number of the destination server (redundant sub-side)

Specify the port number of the secondary server in the duplication. Specify this only if the server is in a duplication configuration.

User

(PSLoginUser)

Logged-in user

In standard projects, "admin" is set by default. During client development work, it is convenient to set this property for test execution, but since this property is not referenced when executing by direct login, it can be left blank during operation.

password

(PSLoginPwd)

Login Password

In standard projects, this property is blank by default. During client development work, it is convenient to set this property for test execution, but since this property is not referenced when executing by direct login, please leave it blank during operation from a security perspective.

When executing by direct login, the parameters specified at the time of login will be used as the setting values for each of the login-related route properties (PSNode, PSPanelPort, PSLoginUser, PSLoginPwd, etc.) with priority. Note that while developing a client, Panel Browser is often run as a test from the browser run button in Panel Editor, but execution by the browser run button operates based on the setting values of the route properties. Therefore, even if you use direct login for execution in production operations, be sure to set each route property appropriately.